The Triad One is a single-zone, high-resolution streaming amplifier and the easy way to add music to any room of a Control4-enabled home without the need to pull wire back to a central location. The Triad One supports high-resolution audio playback, up to 192 kHz / 24 bit, with a built-in amplifier boasting an impressive 105 dB signal-to-noise ratio and 100 watts per channel—enabling incredible sound in any room. Also included is a built-in 10-band EQ delivering exceptional sound output and room optimization.
The Triad One is a single-zone, high-resolution streaming amplifier and the easy way to add music to any room of a Control4-enabled home without the need to pull wire back to a central location. The Triad One supports high-resolution audio playback, up to 192 kHz / 24 bit, with a built-in amplifier boasting an impressive 105 dB signal-to-noise ratio and 100 watts per channel—enabling incredible sound in any room. Also included is a built-in 10-band EQ delivering exceptional sound output and room optimization.
The Triad One is also a great alternative to an AVR in a bedroom, kitchen, or other location when surround sound is not a requirement. Not only does the Triad One have digital and analog audio inputs to take the audio output from a TV to power a soundbar, it has two IR outputs to control the TV and another local source if needed.
A line-level subwoofer output rounds out the system for deep bass when connected to a powered subwoofer. The Triad One is available in white and black, can be placed horizontally or vertically, and can be installed on a bookshelf, in a rack, or mounted behind a TV.
TS-SAMP1-100-BL | TS-SAMP1-100-WH |
---|---|
Inputs: 2 inputs, 1 analog stereo and 1 digital, (S/PDIF coax or TOSLINK optical) Outputs: 1 stereo analog out, 1 sub/mono audio out |
Inputs: 2 inputs, 1 analog stereo and 1 digital, (S/PDIF coax or TOSLINK optical) Outputs: 1 stereo analog out, 1 sub/mono audio out |
Speaker: 1 stereo, Phoenix-style connector |
Speaker: 1 stereo, Phoenix-style connector |
1 USB 2.0 port—supports playback of media stored on USB |
1 USB 2.0 port—supports playback of media stored on USB |
2 IR ports—3.5 mm jack |
2 IR ports—3.5 mm jack |
RJ45 jack for local network connection, 10/100/1000BaseT |
RJ45 jack for local network connection, 10/100/1000BaseT |
2 internal antennas, 2.4 GHz and 5 GHz, 802.11b/g/n |
2 internal antennas, 2.4 GHz and 5 GHz, 802.11b/g/n |
1 × RGB status LED |
1 × RGB status LED |
Yes |
Yes |
Yes |
Yes |
100W @ 4 Ω / 60W @ 8 Ω |
100W @ 4 Ω / 60W @ 8 Ω |
Minimum load: Tolerates 3 Ω loads |
Minimum load: Tolerates 3 Ω loads |
+/- 0.5 dB, ref 1 kHz, 20 - 20,000 Hz, 4 or 8 Ω |
+/- 0.5 dB, ref 1 kHz, 20 - 20,000 Hz, 4 or 8 Ω |
< 0.01% 1 kHz at all output levels below clipping |
< 0.01% 1 kHz at all output levels below clipping |
< -105 dB reference to rated power A-weighted |
< -105 dB reference to rated power A-weighted |
Max input: 2V RMS Analog to digital conversion: 2V RMS = 0 dBFS Analog frequency response: +/- 0.1 dB 20-20,000 kHz ref 1 kHz Analog dynamic range: >114 dB A-weighted THD in a 20 kHz bandwidth: < 0.001% 20 - 20,000 Hz up to 2V RMS |
Max input: 2V RMS Analog to digital conversion: 2V RMS = 0 dBFS Analog frequency response: +/- 0.1 dB 20-20,000 kHz ref 1 kHz Analog dynamic range: >114 dB A-weighted THD in a 20 kHz bandwidth: < 0.001% 20 - 20,000 Hz up to 2V RMS |
Refer to Data Sheet |
Refer to Data Sheet |
24-bit audio processing double-precision filters |
24-bit audio processing double-precision filters |
> 105 dB |
> 105 dB |
+/- 12 dB with 650 Hz turnover frequency in 0.5 dB steps |
+/- 12 dB with 650 Hz turnover frequency in 0.5 dB steps |
Ten one-octave filters in 0.5 dB Steps, +/- 12 dB |
Ten one-octave filters in 0.5 dB Steps, +/- 12 dB |
Attenuates from 0 to -80 dB and off in a tapered curve |
Attenuates from 0 to -80 dB and off in a tapered curve |
Continuously variable from 100% volume to off |
Continuously variable from 100% volume to off |
Output: Mono summing of stereo audio or crossover mode Crossover type: 4th order (24 dB/octave) Linkwitz-Riley |
Output: Mono summing of stereo audio or crossover mode Crossover type: 4th order (24 dB/octave) Linkwitz-Riley |
80 Hz, 90 Hz, 100 Hz, 110 Hz, 125 Hz, 140 Hz |
80 Hz, 90 Hz, 100 Hz, 110 Hz, 125 Hz, 140 Hz |
-30 dB low-pass filtered |
-30 dB low-pass filtered |
5% to 95% non-condensing |
5% to 95% non-condensing |
32°F ~ 102°F (0°C ~ 40°C) |
32°F ~ 102°F (0°C ~ 40°C) |
-4°F ~ 158°F (-20°C ~ 70°C) |
-4°F ~ 158°F (-20°C ~ 70°C) |
8.5 × 3 × 10.25" (21.6 × 7.6 × 26 cm) |
8.5 × 3 × 10.25" (21.6 × 7.6 × 26 cm) |
Audio Inputs / Outputs |
Zone Output |
USB Ports |
IR |
Ethernet Ports |
WiFi |
Front Power LED |
ID button |
Factory Restore Button |
Rated Wattage per Channel |
Impedance |
Frequency Response |
Total Harmonic Distortion (THD) |
Noise |
Analog Input |
Digital Input |
DSP Audio Processing |
Signal to Noise Ratio |
Tone Control |
10 Band EQ |
Volume Control |
Loudness Control |
Subwoofer |
Crossover Frequency |
Signal Present Detector |
Operating Humidity |
Operating Temperature |
Storage Temperature |
Dimensions (W x H x D) |
This Limited Warranty runs for a period of ten (10) years for indoor speakers, three (3) years for Triad powered subwoofers, subwoofer amplifiers and outdoor speakers, five (5) years for all Triad PAMP V2 Amplifiers and two (2) years for all other Triad electronics, provided that Triad Distributed Audio Series 1, Series 2, or Series 3 branded speakers will have a limited lifetime warranty, except for the grill, which is warranted for five (5) years. The terms of our limited warranties can be found here.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.