As TVs get thinner and lighter, maximum holding capacities decrease as a result. The Strong™ Tilt Mount for Flat Panel TVs has a slightly reduced weight rating, with the ultimate goal of going slimmer. But rest assured, we did not compromise on build quality.
As TVs get thinner and lighter, maximum holding capacities decrease as a result. The Strong™ Tilt Mount for Flat Panel TVs has a slightly reduced weight rating, with the ultimate goal of going slimmer. But rest assured, we did not compromise on build quality. Pick one of these thin TV mounts up to feel the 2.5mm thick steel used to make them, and notice the post-installation leveling screws, built-on lockable tabs, and easy-to-use wall plate to help make your custom AV job that much easier.
Underneath its beautiful black powder coat, the SM-T mount is 2.5mm (XL is 3mm) of solid steel. Flat panels are getting thinner and thinner, and so should mounts holding them.
With TV's getting ultra slim, it was time to trim some weight off our mounts. Our SM-T mounts are only 2-¼" (XL is 2.63") deep for a low profile tilt mount.
Leveling a mount is fairly straightforward and rather simple – except when you face an unlevel mantle or just slightly sloped ceiling. We understand the pain of having to re-level an installed mount, so our SM-T mounts include post-install leveling screws for last minute adjustments.
Our Strong™ fixed and tilt mounts now include LokTight™ rotating lockable tabs directly on the arms themselves. The lockable tabs keep the arms against the mount, eliminate easy lifting from curious kids, and allow for a locking device to be added for security measures.
The center bolt hole location includes a notch so you can drill in a sheetrock screw for temporary hanging. Plus, it's reversible so there is no set top or bottom, which means no confusion. And, the wide mouth in the center allows for easy placement over a large Midi plate.
SM-T-XL | SM-T-L | SM-T-M |
---|---|---|
9° Forward / 9° Back |
13° Forward / 8° Back |
13° Forward / 8° Back |
90" |
80" |
42" |
47" |
36" |
22" |
200x300, 300x200, 300x300, 400 x 200, 400x300, 400x400, 500x400, 500x500, 600x400, 600x500, 600x600, 700x500, 700x600, 700x700, 800x500, 800x600, 800x700, 900x700, 1000x700 |
200x200, 200x300, 300x200, 300x300, 400 x 200, 400x300, 400x400, 500x400, 500x500, 600x400, 600x500, 600x600, 700x500 |
100x100, 100x200, 200x100, 200x200, 200x300, 300x200, 300x300, 400 x 200, 400x300 |
Black |
Black |
Black |
2.63" Profile |
2 ¼" Profile |
2 ¼" Profile |
250 lb |
165 lb |
100 lb |
3mm Steel, Powder Coated Black |
2.5mm Steel, Powder Coated Black |
2.5mm Steel, Powder Coated Black |
16.2 lb |
8.6 lb |
6.2 lb |
Tilt |
Maximum TV Size |
Minimum TV Size |
VESA Mounting Pattern |
Color |
Depth |
Maximum Load Support |
Construction |
Weight |
Strong® Mount products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.