For an easier and more professional looking installation, use these discreet in-cabinet racks. Smart design that anticipates all your integrated network needs. These racks are perfect for a built-in cabinet in the living room, boardroom, or light commercial applications. Plus with the optional SR-RACKSLIDE-300 you can easily access the rear panels of the equipment for wiring and servicing - and thanks to a reduced rack depth, you get full rotation to ensure that reaching equipment is a breeze.
For an easier and more professional looking installation, use these discreet in-cabinet racks. Smart design that anticipates all your integrated network needs. These racks are perfect for a built-in cabinet in the living room, boardroom, or light commercial applications. Plus with the optional SR-RACKSLIDE-300 you can easily access the rear panels of the equipment for wiring and servicing - and thanks to a reduced rack depth, you get full rotation to ensure that reaching equipment is a breeze.
Using a rack slide is great, but if it doesn’t allow the rack to rotate completely, it’s only doing half of its job. We reduced the cabinet depth on this rack by two inches – so it clears the end of the cabinet and allows for full rotation – even when set back to 1.5 inches.
We silk screened all the rails and in both directions, so whether you’re installing from the top down, on the front, or on the back, you’ll always know the equipment is going into the right location.
When it comes to the strength of your rack, size matters. Top and bottom plates are stamped from a single sheet of 14 gauge steel. Each rack rail is a stout 11 gauge thick. This rack is so strong it is UL listed.
Our rack rails use an electrocoating process that is every bit as durable as powder-coating and up to 60% thinner for a perfect fit. The top and bottom covers complement the rails with a durable color-matched, powder-coated finish.
Other installer-centric features include a gangable side-by-side (and stackable) design and slots for wire management.
Included with each cabinet rack is a low-friction runner kit. Injection molded rails mount to the bottom plate, making it easier to slide the rack for access to the cabling and equipment.
SR-CAB-8U | SR-CAB-10U | SR-CAB-12U | SR-CAB-14U |
---|---|---|---|
Assembly hardware |
Assembly hardware |
Assembly hardware |
Assembly hardware |
UL Certified |
UL Certified |
UL Certified |
UL Certified |
Black |
Black |
Black |
Black |
Powder Coat |
Powder Coat |
Powder Coat |
Powder Coat |
250 lbs |
250 lbs |
250 lbs |
250 lbs |
Steel |
Steel |
Steel |
Steel |
Each |
Each |
Each |
Each |
8U |
10U |
12U |
14U |
19.06" x 17.43" x 18.2" (Overall Dimensions) |
19.06" x 20.93" x 18.2" (Overall Dimensions) |
19.06" x 24.43" x 18.2" (Overall Dimensions) |
19.06" x 27.93" x 18.2" (Overall Dimensions) |
18" |
18" |
18" |
18" |
Included Hardware |
Certifications |
Color |
Finish |
Maximum Load Support |
Construction |
Sold As |
Rack Spacing |
Dimensions (W x H x D) |
Usable Depth |
Strong® Rack products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.