Parasound NewClassic is a fresh interpretation of the classic designs that have earned top reviews and customer allegiance for over 25 years. NewClassic models deliver maximum "bang for the buck" performance and reliability.
Parasound NewClassic is a fresh interpretation of the classic designs that have earned top reviews and customer allegiance for over 25 years. NewClassic models deliver maximum "bang for the buck" performance and reliability.
All NewClassic Power amps are unconditionally stable into a 2 Ohm load. Just use the load selector switch on the rear panel to match the total A+B impedance. 2 Ohm stability means you can even power two 4-Ohm speaker per channel.
All NewClassic Power amps include two pairs of speaker outputs with front panel A/B buttons. Prevent accidental changes with rear-mounted lockout switch disables front A/B buttons.
Limit low bass frequencies into smaller speakers for better efficiency and less distortion at high volumes.
Included with all New Classic amplifiers are controls for automatic on/off by DC trigger with looping output and automatic on/off by audio signal with 2 sensitivity settings.
Rear-mounted independent left and right gain controls where Max gain equals THX Reference.
Selector switch for Bridged or Stereo Output mode.
PARA-275-V2 | PARA-2125-V2 | PARA-2250-V2 |
---|---|---|
1U |
2U |
3U |
2-Channel |
2-Channel |
2-Channel |
101-200W |
201-300W |
301-500W |
90W x 2, 8 Ω |
150W x 2, 8 Ω |
275W x 2, 8 Ω |
150W x 2, 4 Ω |
225W x 2, 4 Ω |
400W x 2, 4 Ω |
@ 2ohm: 150W x 2, 2Ω (Load switch set to 2-3Ω) |
@ 2ohm: 225W x 2, 2Ω (Load switch set to 2-3Ω) |
@ 2ohm: 400W x 2, 2 Ω (Load switch set to 2-3Ω) |
Bridged Mono: 200W x 1, 8Ω 200W x 1, 4Ω (Load switch set to 2-3Ω) |
Bridged Mono: 400W x 1, 8Ω 400W x 1, 4Ω (Load switch set to 2-3Ω) |
Bridged Mono: 750W x 1, 8Ω, 750 watts x 1, 4Ω (Load switch set to 2-3Ω) |
110 - 120 V / 220 -240 V, 50 - 60 Hz 0.5W standby 25W Idle (no audio) 350W full output |
110 - 120 V / 220 -240 V, 50 - 60 Hz 0.5W standby 32W Idle (no audio) 550W full output |
110 - 120 V / 220 -240 V, 50 - 60 Hz 0.5W standby 35W Idle (no audio) 1000W full output |
20 amps peak, per channel |
35 amps peak, per channel |
45 amps peak, per channel |
0.35% @ full rated output, 0.025@average listening levels |
0.25% @ full rated output, 0.015@average listening levels |
0.20% @ full rated output, 0.015@average listening levels |
Yes |
Yes |
Yes |
Rack mount kit may be purchased separately (RMK11) |
2U rack mount kit may be purchased separately (RMK22) |
Rack mount kit may be purchased separately (RMK33) |
20 Hz - 50 kHz, +0/-3 dB, 1W |
20 Hz - 50 kHz, +0/-3 dB, 1W |
20 Hz - 50 kHz, +0/-3 dB, 1W |
80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz |
85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz |
85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz |
33 k Ω |
33 k Ω |
33 k Ω |
29 dB |
29 dB |
29 dB |
800 mV for full rated output (28dB) |
1 V in for 28.28 V out, THX standard |
1 V in for 28.28 V out, THX standard |
110 dB at rated output, IHF A-weighted 103 dB at rated output, unweighted 93 dB at 2.828 V output, IHF A-weighted 84 dB at 2.828 V output, unweighted |
114 dB at rated output, IHF A-weighted 106 dB at rated output, unweighted 93 dB at 2.828 V output, IHF A-weighted 84 dB at 2.828 V output, unweighted |
114 dB at rated output, IHF A-weighted 106 dB at rated output, unweighted 93 dB at 2.828 V output, IHF A-weighted 84 dB at 2.828 V output, unweighted |
DC 9 – 12V, 15 mA |
DC 9 – 12V, 15 mA |
DC 9 – 12V, 15 mA |
N/A |
N/A |
N/A |
17.25" x 1.75" x 16" (437 x 44 x 406mm) (without feet, with cables) 17.25" x 2.5" x 16" (437 x 63 x 406mm) (with feet and cables) |
17.25" x 3.5" x 16" (437 x 89 x 406mm) (without feet, with cables) 17.25" x 4.25" x 16" (437 x 107 x 406mm) (with feet and cables) |
17.25" x 5.25" x 18.5" (437 x 133 x 470mm) (without feet, with cables) 17.25" x 6" x 18.5" (437 x 153 x 470mm) (with feet and cables) |
Net: 20 lbs (9.1 kg) |
Net: 27 lbs (12.3 kg) |
Net: 43 lbs (19.5 kg) |
Rack Spacing |
Channels |
Watts Per Channel |
Power Output @ 8 ohm |
Power Output @ 4 ohm |
Power Output |
Audio Features |
Power Consumption |
Current Rating |
Total Harmonic Distortion (THD) |
Power RMS |
Features |
Frequency Response |
Audio Crosstalk |
Impedance Input |
Audio Gain |
Sensitivity Input |
Signal to Noise Ratio |
External Trigger Voltage |
Connectors |
Dimensions (W x H x D) |
Weight |
We want to make our Affiliate program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Parasound Warranty.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.