Binary™ 900 Series 4K Media over IP Receivers, when joined in a system with MoIP Transmitters and one MoIP Controller , create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video and all multichannel formats including Dolby Atmos and DTS-X.
Binary™ Series 4K Media over IP (MoIP) Transmitters with Audio Downmixing, when joined in a system with a MoIP Receiver (B-900-MOIP-4K-RX or B-900-MOIP-4K-RX-RAC) and one MoIP Controller, create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Plus, with Audio Downmixing and Audio Lip Sync adjustment, you'll have ultimate audio flexibility. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source streams and fast, simple firmware updates. MoIP Transmitters also include a selection of audio features that allow dealers to solve issues on every job, including HDMI loop-out, audio breakout, and the ability to fix the audio to stereo or 5.1 multichannel. Lastly, RS-232, IR, and IP drivers for popular control systems provide tremendous flexibility in system design.
When installing Binary MoIP in an existing or new system, please ensure the latest firmware is installed.
A MoIP system can consist of any combination of 1 controller, a Layer 2 or above PoE Switch, MoIP transmitters with and without audio downmixing, and MoIP receivers with and without audio downmixing.
Our Binary™ 900 Series 4K Media over IP Transmitter with Downmixing allows downmixing of multi-channel audio to 2-channel audio, eliminating the need to choose multi-channel or force downmixing, providing immersive multi-channel audio in one area while sharing throughout the space in 2-channel audio format.
Binary™ 900 Series 4K Media over IP Transmitters and Receivers support Dolby Digital, Dolby Digital+, Dolby TrueHD, DTS, DTS-HD, and DTS-HD Master downmixing for ultimate flexibility in video and audio integration.
**The SPDIF input on the Receiver and output on the Transmitter is available for future use only.
The Binary™ 900 Series 4K Media over IP Transmitters and Receivers with Downmixing support lip-sync adjusting for the analog output from 0ms to 250ms for perfect audio/video synchronization.
The B-900-MOIP-4K-RX-2AC receiver and B-900-MOIP-4K-TX-2AC transmitter are designed to coexist with B-900-MOIP-4K-RX receivers and B-900-MOIP-4K-TX transmitters, letting you downmix when needed. Plus, decoders at each endpoint provide additional system flexibility. Downmix audio from each source into a multizone audio system, expand audio from a MoIP receiver to a secondary listening zone with only 2-channel audio, or both!
MoIP encodes video up to 4K HDR using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).
Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. IR or RS-232 commands can be issued via IP and generated at each endpoint. If desired, IR and RS-232 virtual routing can also be configured from any TX to any or all RX(s). Desired methods for issuing commands are selectable via the local UI. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.
MoIP provides peace of mind when you leave the job. Not only is it inherently reliable, but there are a host of tools to assist in troubleshooting. Each transmitter provides a live screenshot of the source output, so you can quickly determine if the source is generating video. Additionally, deeper insights are readily available – such as resolution, refresh rate, color depth and HDCP version detected. Best of all, thanks to OvrC, all of this is easily accessed remotely so you can resolve issues caused by unpredictable sources – or customers – without rolling a truck.
Our engineers have written drivers for the industry’s leading control systems, including Control4, Crestron, ELAN, URC and more – so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization – and we’ve even provided the MoIP controller’s API to create your own drivers if needed.
Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch (210 and 310 Series), so you don’t need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less.
The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client’s specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.
With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K HDR). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K HDR). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.
Binary MoIP delivers something no other media product can – award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots.
B-900-MOIP-4K-TX-2AC |
---|
Each |
Mounting ears, Mounting ear screws, Rubber feet |
Interlaced Video Support: Yes HDR Support: HDR 20/24Hz Video Wall Support: Yes, 2x2, 3x3 and 4x4 Video Compression: Visually Lossless Max. HDMI Bandwidth: 8.91Gbps Max. HDMI Pixel Clock: 297MHz |
Up to 4K HDR@30Hz 4:2:2 | 4K HDR@30Hz 10 bit | 4K UHD@30Hz 4:4:4 8bit Plus Full 1080p HD and lower resolution including interlaced video formats |
HDR Content when available 4K HDR@30Hz 10 bit Integrated scaler to support 4K|HDCP 2.2 on 1080p|HDCP 1.4 displays |
Yes |
IN: 1 x 19 pin Type A Female OUT: 1 x 19-pin Type A Female |
RGB, YCbCr |
4:4:4, 4:2:2, 4:2:0 |
8, 10, 12bit |
2CH PCM, LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby True HD, Dolby Digital Plus, DTS, DTS-HD Master Audio, DTS NeoX, Dolby Atmos, DTS:X |
Audio Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Audio Bit Depth: up to 24-bit |
Stereo Injection/Audio In: 1 x Mini Stereo 3.5mm Jack (replaces HDMI In audio) Stereo Breakout/Audio Out: 1 x L/R RCA Audio (Extraction audio only when 2ch audio present) Analog Audio In: Yes Analog Audio Out: Yes SPDIF output: For future use |
TX/RX Switching: via MoIP Controller 2-Way IR Routing: Yes, independent of video RS-232 via IP or virtual routing, Modify IR via 2-way routing or IP, Add Standalone App embedded into controller |
20-60 kHz |
1 x 3.5mm Stereo (blue), 12V |
1 x 3.5mm Stereo (green) |
Supports single switch deployments: Yes Supports multiple switch deployments: Yes (multiple gigabit uplink required) On-screen Device Identification: Yes Auto Device Discover: Yes |
IR RCVR PWR OFF/ON |
Serial/RS-232 DTE/DCE |
RS-232 over IP |
1 x RJ-45 (EIA-561) |
N/A |
Required Managed Switch: Layer 2 Managed w/ IGMP Snooping Req. Port Throughput: 1Gbps Max. Distance from Switch: 100m (328 ft) Compatible Category Cable: CAT 5E/6/6A/7 |
150-300 Mbps (Avg) 850 Mbps (Max) |
1 x RJ45 (T568B) LAN + PoE |
1 frame (16ms - 60Hz, 33ms - 30Hz) |
10/100/1000 Mbps |
Assigned by controller |
12VDC 2A (optional accessory) |
7.5 Watts (Max) |
20-90% RH (no condensation) |
32-104°F |
-4-140°F |
w/o rack ears: 8.2" x 0.83" x 6.14" |
1U |
CE, FCC, RoHS |
Sold As |
Included Accessories |
Video Features |
Transmitter Video Resolution |
Receiver Video Resolution |
HDCP Compliance |
HDMI Connections |
Colorspace |
Chroma Subsampling |
Color Depth |
Supported Audio Formats |
Audio Features |
Audio Inputs / Outputs |
Control Features |
IR Signal Frequency |
IR Inputs |
IR Outputs |
System Configuration |
DipSwitch 1 Controls |
DipSwitch 2 Controls |
RS232 Control Desc. |
RS-232 Ports |
CEC |
Networking Features |
Bit Rate |
Ethernet Ports |
Latency |
Ethernet Pass Through 10/100Mbps |
IP Address |
Power Consumption |
PoE Consumption |
Operating Humidity |
Operating Temperature |
Storage Temperature |
Dimensions (W x H x D) |
Rack Spacing |
Certifications |
This Binary™ product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.