Do you have a system that wasn't pre-wired for a subwoofer, or a wire that’s in the wrong spot? No need to worry –just go wireless. Use this Episode receiver with the Episode® Wireless Subwoofer Kit, and you can install up to 4 subwoofers anywhere in the room.
Do you have a system that wasn't pre-wired for a subwoofer, or a wire that’s in the wrong spot? No need to worry –just go wireless. Use this Episode receiver with the Episode® Wireless Subwoofer Kit, and you can install up to 4 subwoofers anywhere in the room. Now you can customize your installation and tailor the sound field for any area without spending countless hours wiring it.
With this receiver, it’s easier than ever to place the subwoofer in the sweet spot. Relocate the sub to anywhere there’s an electrical outlet to achieve the best sound possible. Plus, a compact form factor keeps both the transmitter and receiver out of sight. For a quick tutorial on optimum subwoofer placement, check out our video on the Video tab.
Sync up to 4 receivers to a single transmitter using Easy SYNC technology. After powering up each device, simply press and hold the SYNC button once on each end. The two will automatically connect to each other – and more importantly – stay that way, even if the power goes out.
The transmitter and receiver utilize a less-congested 5 GHz transmission with frequency hopping (FSK) for decreased interference and latency. This high-frequency technology is similar to those used in professional and live concert venues, so it’s more immune than traditional consumer products to Wi-Fi signals, microwave ovens, and other RF devices.
With a delay of less than 20 milliseconds, subwoofer signals are instantly transmitted and reproduced. Plus, our engineers have verified the system integrity to up to 30 feet.
FSK, or frequency hopping, adds another layer of reliability by automatically finding open frequencies to communicate. If interference is found on one channel, it simply “hops” to an available one.
ES-SUB-WIRELESS-RCVR |
---|
Black |
RCA |
30 ft. max (10m) |
84 dB |
10 Hz - 900 Hz |
5200 - 5800 MHz |
< 22 MHz |
5 GHz Frequency Hopping; QPSK (DSSS) digital radio |
< 20 ms |
1.84V |
2.20” x 1.12” x 3.35” |
Color |
Connectors |
Range |
Signal to Noise Ratio |
Frequency Range |
Operating Frequencies |
Channel Width |
Modulation |
Latency |
Max Input Signal (LFE) |
Dimensions (W x H x D) |
This Episode® Speaker product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.