These efficient, class-D Episode® Digital Amplifiers deliver a powerful 70 watts RMS per channel. Available with 8 or 12 channels, these amps are perfectly at home in multi-room audio applications, They feature audio sensing turn-on, loop outputs, adjustable gain control, and bridgeable outputs, giving installers the versatility required for today's sophisticated audio systems.
These efficient, class-D Episode® Digital Amplifiers deliver a powerful 70 watts RMS per channel. Available with 8 or 12 channels, these amps are perfectly at home in multi-room audio applications, They feature audio sensing turn-on, loop outputs, adjustable gain control, and bridgeable outputs, giving installers the versatility required for today's sophisticated audio systems.
Audio-sense is perfect for multi-room audio – when the last source shuts down, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs and outputs allow you to use a preamp or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.
For larger speakers or high-power applications, bridgeable channels allow you to combine any 2 channels into a single 140W channel. For example, run 2 “standard” zones of audio plus one high power zone. Or use these amplifiers as ultimate bi-amping solutions for two-channel applications with 4 bridged channels.
These amps offer gain adjustments for each channel pair, allowing you to independently trim output levels in each zone whether using the global or line level inputs. In volume control-based systems, these may be used to prevent harmful clipping that could cause damage to the amplifier or speakers.
From single source with volume controls to independent sources at each room – or any combination in between – this amplifier has the flexibility you need. Global A/B provides two independent global sources that can be mapped to desired channel pairs. When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components.
Multi-room AV environments can be tough on an amplifier. Each speaker run acts like an antenna, so all kinds of nasty things can happen when the weather changes. That’s why we engineered this amp with surge protection components that exceed CE Level 3 standards. During development, every connection – all speaker outputs, RCA connectors even the power input - were ESD tested with up to 15,000V and Surge tested at 2,400V.
This amplifier was engineered for not only the best surge protection but also with an isolated common ground for the audio circuits. The result is a great sounding, and reliable system that your customer will enjoy for years.
A slim 2U chassis takes up less space when stacked on a shelf or installed in a rack. Included removable rack ears and amplifier feet give you the flexibility to install it where you need it.
Green Energy Management technology is a stringent product design criteria established by SnapAV that focuses on energy savings through active energy management circuitry.
EA-AMP-8D-70A | EA-AMP-12D-70A |
---|---|
8 |
12 |
20,000 ohm |
20,000 ohm |
70W |
70W |
50W |
50W |
140W |
140W |
500mV |
500mV |
Class D-3 |
Class D-3 |
<0.1% |
<0.1% |
20 Hz to 20 kHz |
20 Hz to 20 kHz |
Black |
Black |
17" x 4" x 13" |
17" x 4" x 13" |
800W |
1110W |
115-230V AC |
115-230V AC |
25.3 lbs |
32 lbs |
95 dB |
95 dB |
51-100W |
51-100W |
Channels |
Impedance Input |
Power Output @ 4 ohm |
Power Output @ 8 ohm |
Power Output Bridged @ 8 ohm |
Sensitivity Input |
Topology |
Total Harmonic Distortion (THD) |
Frequency Response |
Color |
Dimensions (W x H x D) |
Power Consumption |
Line Voltage |
Weight |
Signal to Noise Ratio |
Watts Per Channel |
This Episode® Amplifier product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.