Open it, close it, turn it on, turn it off—all without the wire.
Open it, close it, turn it on, turn it off—all without the wire. Automating a home’s garage doors, window blinds, fireplaces, projection screens, televisions, AV receivers, and a variety of other devices just got a lot easier to do—and in a lot less time. And all without the wire.
Get the job done using Control4’s ZigBee IO. This easy-to-install solution can be configured to provide a combination of two relays or up to four contact sensors. Additionally, it provides two IR outputs, one magnetic contact sensor, and one temperature and humidity sensor, all packed into a single, small device. The ZigBee IO expands your Control4 home's automation capabilities, controlling devices in the home theater or garage, and anywhere inside and outside the home, with standard Control4 System Remote Controls, touch screens, or keypads.
The ZigBee IO is compact and installs easily. Discreetly placed, the ZigBee IO can provide control of a television and AV receiver using its IR outputs or can be an excellent solution for detecting open and closed states or activating a garage door or gate.
Complete Control4 system integration—The ZigBee IO also includes an internal magnetic contact sensor that wirelessly integrates into Control4 systems. To trigger the sensor, you can use any standard door or window sensor magnet.
A built-in temperature and humidity sensor adds remote temperature- and humidity-sensing capabilities. This gives Control4 systems additional automation features and capabilities based on indoor or outdoor temperature events. The ZigBee IO functions appear in Control4 Composer projects as relays, contact sensors, and IR outputs that you can trigger and monitor to control events and take action throughout the Control4 system based on commands or other events.
C4-Z2IO |
---|
OS version 2.10.0 or greater |
Each installed ZigBee IO adds sensor and input connections to the Composer project. |
The ZigBee IO (C4-Z2IO) is available in the Composer Online Database |
Control4 ZigBee Pro mesh networking protocol, based on the IEEE 802.15.4 ZigBee standard |
250 kbps |
(ZigBee) 2.405 - 2.475 GHz |
32 nodes |
4 inputs, accepts AWG 16-28, common ground connection |
0.5A @ 50V, 1A @ 24V or less Contact resistance: 30-40 milliohms |
1 thermistor input, sold separately See "Available accessories" below |
2 x 3.5 mm IR ports |
Internal magnetic reed switch Requires external magnet, sold separately |
Internal thermistor can be used for local temperature sensing: 0°C to 40°C (32°F to 104°F) |
Can measure local humidity from 5% to 90% |
100mA at 12V, fully active |
External low-voltage power supply: Micro USB power supply (included) AC/DC 5-24V (optional) |
This device is not waterproof and must be kept out of direct contact with water The product must not be immersed. |
Humidity 5% to 95% non-condensing |
0°C to 40°C (32°F to 104°F) |
-29°C to 70°C (-20°F to 158°F) |
65.7 mm x 26.6 mm x 78.7 mm (W X H X L) (2.6" x 1.05" x 3.1") |
70.9 grams (2.5 oz.) |
External thermistor: ZCA-EXT10A, AC-DOTS1-W, AC-PMT51-W |
Control4 OS system requirements |
Control4 system integration |
Driver |
Networks Supported |
ZigBee data rate |
Frequency Range |
ZigBee routing table |
Contact sensor input |
Relay terminal ratings |
External thermistor |
Infrared |
Internal contact |
Integrated internal thermistor |
Integrated humidistat |
Power Consumption |
Power Supply |
Environmental |
Humidity |
Operating Temperature |
Storage Temperature |
Dimensions (W x H x D) |
Weight |
Available accessories |
Control4 warrants its hardware product to be free from defects in material and workmanship during the warranty period. If the hardware proves to be defective in material or workmanship during the warranty period, Control4 will, at its sole option, repair or replace the product with a like product. The warranty extends only to products purchased directly from Control4 Corporation or an Authorized Control4 Dealer. For complete limited warranty information, including details on purchaser legal rights as well as limited warranty exclusions, visit here.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.