The AT-UHD-SW-5000ED is a 5x1 switcher with two HDBaseT inputs, three HDMI inputs, mirrored HDMI and HDBaseT outputs, balanced audio outputs, automatic input selection, and automatic display control capability. HDBaseT inputs match perfectly with Atlona’s HDVS-200-TX modules, enabling VGA and HDMI sources to be easily integrated into a system.
The AT-UHD-SW-5000ED is a 5x1 switcher with two HDBaseT inputs, three HDMI inputs, mirrored HDMI and HDBaseT outputs, balanced audio outputs, automatic input selection, and automatic display control capability. HDBaseT inputs match perfectly with Atlona’s HDVS-200-TX modules, enabling VGA and HDMI sources to be easily integrated into a system. This switcher supports 4K@60 Hz, 4:2:0; (10.2 Gbps). It transmits AV signals along with Ethernet, power, and control over a single cable to displays up to 330 feet (100 meters.) Control options include automatic input selection, front-panel buttons, and compatibility with IR, RS-232, or TCP/IP-based control systems. Displays are automatically turned on and off using CEC, IP, or RS-232.
This switcher supports two HDVS-150 or HDVS-200 series transmitters, and can be placed at remote sources near lecterns, conference tables, and instructor’s desks to simplify integration. Installers can even eliminate power supplies when this switcher is used with PoE-powered transmitters. And because this switcher carries AV signals, control and power over a single HDMI cable, it’s more install-friendly than ever.
Enable dual display environments with extended 330 feet (100 meter) distance displays, or utilize them with local displays for a convenient presentation tool. These mirrored input/output pairs eliminate the extra cost that’s associated with extra system components, simplifying installation. Additionally, the HDMI output can be used with an additional HDBaseT transmitter. This switcher is compatible with the AT-UHD-EX-100CE-RX receiver.
The AT-UHD-SW-5000ED provides control to a display through TCP/IP, RS-232, or CEC*. CEC simplifies system design and integration while reducing costs without the need for a separate control system. With automatic display control, the SW-5000ED can trigger a display to power on automatically whenever a laptop or other device is connected, whether locally to the switcher or over HDBaseT. At the end of the presentation, when the presenter disconnects the laptop, the switcher forces the display to power off. Ease of presenter interaction with the system, and the savings incurred by automatic display shutdown provide a significant return on investment. Display control capability can also be triggered by an external control system. A power button on the front panel can be used for manual on/off control of either the switcher or the display. Front panel volume controls are also available to control the display’s internal audio, or another device with volume control, such as a DSP or another switcher.
Using hot-plug-detect and video detection, this switcher automatically selects the active input when sources are connected or if it senses a change in source power status. This ensures reliable auto-switching operation for all video sources, including DVRs, DisplayPort / Mini DisplayPort adapters, and other devices that always maintain the HPD line at the 5 volt “high” state but may not be delivering active video.
Using Atlona AMS, use Ethernet-enablement to simplify your installation, or perform needed maintenance with IP controlled switcher, transmitters and receivers. Configure, backup, update, maintain and monitor your switch from a simple PC interface so product integration goes smoothly every time.
This switcher adds internally-generated or externally-generated display control signals to an HDBaseT transmission. Simplifies display control from third-party control systems.
We offer a wide range of communication equipment—including switchers, receivers, transmitters, converters, and more—that work together to create fully-integrated commercial conferencing solutions.
AT-UHD-SW-5000ED |
---|
CAT5e/6 @ 4K: up to 70 meters, CAT5e/6 @ 1080p: up to 100 meters, CAT6a/7 @ 4K: up to 100 meters |
1.4 |
8-bit, 10-bit, 12-bit Color Space: YUV, RGB Chroma Subsampling: 4:4:4, 4:2:2, 4:2:0* |
S/PDIF: PCM 2Ch, Dolby Digital, DTS 5.1 |
8.75" x 1.73" x 10.28" |
20 to 90% non-condensing |
32°F to 122°F |
44.22W |
4°F to 140°F |
3.70 lb |
4096×2160@24/25/30/50*/60Hz*, 3840×2160@24/25/30/50*/60Hz*, 2048x1080p, [email protected]/24/25/29.97/30/50/59.94/60
Hz, 1080i@50/59.94/60Hz, 720p@50/59.94/60Hz, 576p, 576i, 480p, 480i |
PCM 2Ch, LPCM 5.1, LPCM 7.1, Dolby
Digital, DTS 5.1, Dolby Digital+, Dolby
TrueHD, DTS-HD Master Audio, Dolby
Atmos, DTS:X |
2560×2048, 2560×1600, 2048×1536, 1920×1200, 1680×1050, 1600×1200, 1600×900, 1440×900, 1400×1050, 1366×768, 1360×768, 1280×1024, 1280×800 1280×768, 1152×768, 1024×768, 800×600, 640×480 |
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kH |
up to 24-bit |
Switchable – Compliant/Non-compliant – |
AC100-240V ~ 50/60Hz |
48V/3.125A |
HDBaseT Connections |
HDCP Compliance |
HDMI Max Color Depth |
Audio Output Connectors |
Dimensions (W x H x D) |
Operating Humidity |
Operating Temperature |
Power Consumption |
Storage Temperature |
Weight |
Supported Resolutions |
HDMI |
VESA Resolution |
Supported Sample Rates |
Bit Rate |
CEC |
Power Input |
Power Output |
We want to make our Third-Party Partner program as easy as possible. That’s why we process all claims directly, without any third party telephone tag. Specific warranty terms and details from the manufacturer are below. View the full Atlona® Warranty.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.