Binary™ 900 Series 4K UHD Media over IP Receivers, when joined in a system with MoIP Transmitters and one MoIP Controller create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video and all multichannel formats including Dolby Atmos and DTS-X. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there.
Binary™ 900 Series 4K Media over IP Receivers, when joined in a system with MoIP Transmitters (B-900-MOIP-4K-TX or B-900-MOIP-4K-TX-RAC) and one MoIP Controller create a highly scalable, flexible IP media distribution system delivering visually lossless 4K HDR (HDR 30Hz and HDCP 2.2 compatible) video. Operating on a cost-effective gigabit Layer 2 PoE switch, this setup is the fastest and simplest out there. Additionally, OvrC remote management allows for quick system setup, easy troubleshooting with access to live screenshots of source stream and fast, simple firmware updates. MoIP Receivers also include an integrated video scaler, allowing 4K source content to be simultaneously distributed to both 4K and 1080p displays, plus audio breakout. Lastly, RS-232, IR, and custom drivers for popular control systems provide tremendous flexibility in system design.
MoIP encodes video up to 4K HDR using visually-lossless, variable bit-rate compression technology. The system is HDR and HDCP 2.2 compatible, resulting in an ultra-stable video stream, perfect audio/video sync and ultra-low latency (one frame).
Traditional matrix switchers force you to downgrade all source content to the lowest video quality that will work on all displays. Whether your customer is moving to a full, 4K system now or upgrading from 1080p to 4K over time, MoIP provides the custom solution that fits their budget, without compromising quality.
Group 4, 9, or even 16 displays together to create amazing video walls. Configuration takes only a minute, without the need to program each device. The result is a new “virtual” receiver, so you simply select the desired source, making control integration a breeze.
Switching of inputs (TX) to outputs (RX) is done through IP commands from a control system sent to the MoIP controller. Out of the box, the system supports three methods for controlling sources and displays: IR, RS-232 and CEC. IR or RS-232 commands can be issued via IP and generated at each endpoint. If desired, IR and RS-232 virtual routing can also be configured from any TX to any or all RX(s). Desired methods for issuing commands are selectable via the local UI. Lastly, for more basic installs where display on and standby is all that is needed, MoIP also supports CEC.
Our engineers have written drivers for the industry’s leading control systems, including Control4, Crestron, ELAN, URC and more – so controlling the system has a familiar feel. Advanced features like IR routing and RS-232 over IP deliver even more flexibility and customization – and we’ve even provided the MoIP controller’s API to create your own drivers if needed.
Gone are the days of head-scratching system design, next-level network know-how and confusing configurations. Binary MoIP removes all that complexity, requiring only a Layer 2 PoE switch (210 and 310 Series), so you don’t need a network guru to install it. OvrC-enablement, simple setup and intuitive user-interfaces enable you to go from power-on to picture in 5 minutes or less.
The Binary MoIP solution allows you to fit, scale, and upgrade the solution to match your client’s specific needs. Need a 6x8 for one job and a 7x13 for another one? No problem. What about adding a video wall? Done. Instead of replacing the entire system, you can simply purchase new transmitters or receivers when adding sources or displays.
With Binary MoIP, legacy EMI interference and HDCP/EDID issues are eliminated. Each source is encoded, visually lossless, at the highest quality possible (ex. 4K HDR). Then at each display, the signal is decoded from the network and scaled to the desired resolution (ex. 1080p or 4K HDR). Built-in scaling in the RX means that mixed 1080p/4K systems are no longer a problem, plus pass-through of all audio formats like Dolby Atmos and DTS:X are fully supported.
Binary MoIP delivers something no other media product can – award-winning remote management. OvrC quickens initial setup by auto-discovering the controller, plus it provides unparalleled troubleshooting tools like real-time video screenshots.
B-900-MOIP-4K-RX |
---|
Each |
Mounting ears, Mounting ear screws, Rubber feet |
Up to 4K HDR@30Hz 4:2:2 | 4K HDR@30Hz 10 bit | 4K UHD@30Hz 4:4:4 8bit Plus Full 1080p HD and lower resolution including interlaced video formats |
HDR Content when available 4K HDR@30Hz 10 bit Integrated scaler to support 4K|HDCP 2.2 on 1080p|HDCP 1.4 displays |
Integrated Video Scaler: Yes (4K, 1080p) Interlaced Video Support: Yes HDR Support: HDR 20/24Hz (8bit) Video Wall Support: Yes, 2x2, 3x3 and 4x4 Video Compression: Visually Lossless Max. HDMI Bandwidth: 8.91Gbps Max. HDMI Pixel Clock: 2 |
Yes |
Yes |
IN: N/A OUT: 1 x 19-pin Type A Female |
4:4:4 |
8, 10, 12bit |
Audio Sample Rate: 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Audio Bit Depth: up to 24-bit |
2CH PCM, LPCM 2.0, LPCM 5.1, LPCM 7.1, Dolby Digital, Dolby True HD, Dolby Digital Plus, DTS, DTS-HD Master Audio, DTS NeoX, Dolby Atmos, DTS:X |
Audio In: NA Stereo Breakout/Audio Out: 1 x L/R RCA Audio (Extraction only when 2CH audio is present) Analog Audio In: No Analog Audio Out: Yes |
Control Features – Add RS-232 via IP or virtual routing, Modify IR via 2-way routing or IP, Add Standalone App embedded into controller. |
20-60 kHz |
1 x 3.5mm Stereo (blue), 12V |
1 x 3.5mm Stereo (green) |
IR RCVR PWR OFF/ON |
Serial/RS-232 DTE/DCE |
RS-232 over IP |
1 x RJ-45 (EIA-561) |
Over IP |
Required Managed Switch: Layer 2 Managed w/ IMGP Snooping Req. Port Throughput: 1Gbps Max. Distance from Switch: 100m (328 ft) Compatible Category Cable: CAT 5E/6/6A/7 |
150-300 Mbps (Avg) 850 Mbps (Max) |
1 x RJ45 (T568B) LAN + PoE |
1 frame (16ms - 60Hz, 33ms - 30Hz) |
10/100/1000 Mbps |
Assigned by controller |
Supports single switch deployments: Yes Supports multiple switch deployments: Yes (multiple gigabit uplink required) On-screen Device Identification: Yes Auto Device Discover: Yes |
20-90% RH (no condensation) |
32-104°F |
-4-140°F |
w/o rack ears: 6.7" x 0.83" x 4.72" |
1U |
12VDC 2A (optional accessory) |
7.5 Watts (Max) |
CE, FCC, RoHS |
Sold As |
Included Accessories |
Transmitter Video Resolution |
Receiver Video Resolution |
Video Features |
HDCP Compliance |
HDMI Compliance |
HDMI Connections |
Chroma Subsampling |
Color Depth |
Audio Features |
Supported Audio Formats |
Audio Inputs / Outputs |
Control Features |
IR Signal Frequency |
IR Inputs |
IR Outputs |
DipSwitch 1 Controls |
DipSwitch 2 Controls |
RS232 Control Desc. |
RS-232 Ports |
CEC |
Networking Features |
Bit Rate |
Ethernet Ports |
Latency |
Ethernet Pass Through 10/100Mbps |
IP Address |
System Configuration |
Operating Humidity |
Operating Temperature |
Storage Temperature |
Dimensions (W x H x D) |
Rack Spacing |
Power Consumption |
PoE Consumption |
Certifications |
This Binary™ product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.