The Carbon Series Dual Arm Articulating Mounts offers 23" (Large) and 28” (XL) of arm extension with UL Listed weight capacity to ensure durability for any install. The mount is equipped with a slew of slots across the wall plate to ensure you hit a stud in any situation. Plus, the carton contains a wall mounting template for perfect placement every time.
The Carbon Series Dual Arm Articulating Mounts offers 23" (Large) and 28” (XL) of arm extension with UL Listed weight capacity to ensure durability for any install. The mount is equipped with a slew of slots across the wall plate to ensure you hit a stud in any situation. Plus, the carton contains a wall mounting template for perfect placement every time.
Comes equipped with 3 cable management clips that easily snap on to the articulating arms to keep cables neat and tidy.
Swiveling up to 180 degrees and extending out from the wall 23” (Large) and 28” (XL), this mount moves fluidly with minimal force required.
Easily mount the TV plate to the articulating arms using the conical washers on the back to guide the plate into place. Secure the mount using the bolts and nuts for a quick and easy install.
We know that TV manufacturers are always changing placement of power, inputs, and outputs on the back of the TV, so we wanted to make sure we had a solution for any possible design. The Dual Arm Articulating Mount comes with an H-pattern bracket that is VESA compatible up to 600 x 400 (Large) and 800 x 600 (XL). However, if a smaller 400 x 400 X-pattern bracket is all you need, that can be purchased separately and is compatible with the same TV mounting head.
The TV plate has +/- 5° of roll adjustment built in for easy post-install leveling. Loosen the nuts on the back of the plate, roll to level as necessary, and tighten back in place.
The arm assembly base plate has a tilt angle of +12° / -5°, making it easy to get the TV at the perfect viewing angle. Simply use the included tool to loosen the nuts, adjust the tilt, and tighten it back up.
The center-hanging hole at the top of the wall plate allows you to drill a sheetrock screw for temporary hanging
Mounting template included to make measurement, pre-planning, and single-person install as easy as possible.
This Carbon Series Mount is UL Certified for strength and durability, so you know your customers will be in good hands. When a mount is tested by UL, it is tested to withstand 4 times its holding capacity. You should never go above the listed weight limit of this mount – just know it can handle the weight it promises.
SM-CB-ART2-L | SM-CB-ART2-XL |
---|---|
23" |
28" |
3.43" off the wall |
3.25" off the wall |
+/- 5° |
+/- 5° |
180° |
180° |
+15° / -5° |
+15° / -5° |
80" |
90" |
40" |
49" |
75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x100, 300x200, 300x300, 300x400, 400x100, 400x200, 400x300, 400x400, 500x200, 500x300, 500x400, 600x200, 600x300, 600x400 |
75x75, 100x100, 100x200, 200x100, 200x200, 200x300, 300x100, 300x200, 300x300, 400x200, 400x300, 400x400, 500x200, 500x300, 500x400, 500x500, 600x200, 600x300, 600x400, 600x500, 600x600, 700x300, 700x400, 700x500, 700x600, 800x300, 800x400, 800x500, 800x |
UL Certified |
UL Certified |
150 lbs. |
200 lbs. |
Distance Extended |
Distance Retracted |
Roll |
Swivel |
Tilt |
Maximum TV Size |
Minimum TV Size |
VESA Mounting Pattern |
Certifications |
Maximum Load Support |
Strong® Mount products have a Lifetime Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.