Get ultra sharp 1080p resolution over HD-TVI analog with our Luma 500-series cameras, plus all the installer-friendly features you know and love. Dual voltage lets it work in any system, and 1080p resolution supports crystal-clear widescreen capabilities.
Get ultra sharp 1080p resolution over HD-TVI analog with our Luma 500-series cameras, plus all the installer-friendly features you know and love. Dual voltage lets it work in any system, and 1080p resolution supports crystal-clear widescreen capabilities. Plus, a built-in OSD joystick is located directly at the camera for easy fine-tuning adjustments. These cameras are even available in grey or white to blend in perfectly wherever you need them.
We’re not kidding. Luma 500-series analog cameras feature ultra-sharp 1080p resolution thanks to HD-TVI technology. These cameras support HD-TVI or traditional analog up to 960H – the choice is yours. Analog picture has never looked so good.
Easily adjust video and OSD settings with a test port and OSD joystick located right at the camera. No more running back and forth to the DVR! The included breakout also works seamlessly with our optional CCTV tester.
Luma cameras can detect improper polarity and will shut down circuitry until the circuit is fixed, keeping your install running safe and smooth, reducing failures and helping to prevent return trips. Our 500 and 700 series cameras have dual voltage to enable both 12V DC, or 24V AC power.
Need to fine-tune OSD settings after dark, but can't roll a truck or run an extra RS-485? Just log in remotely to the DVR - our recorders feature built-in camera control thanks to HD-TVI technology.
Working with a system that doesn’t have HD-TVI technology? Our 300, 500, and 700 series dome and bullet cameras have a built-in resolution switch that allows you to effortlessly toggle between 960H and HD-TVI.
Luma 500-series cameras offer up to 30 meters or 100 feet of IR. Night vision IR helps eliminate over-exposure in dim settings, and evenly illuminates the subject so you can make sure you’re not missing something.
This camera can be used with a Luma bullet junction mount for a variety of installations. Pole mounts are also sold separately for outdoor applications.
See the differences between the 100, 300, 500, and 700 Series Analog cameras.
LUM-500-BUL-A-GR | LUM-500-BUL-A-WH |
---|---|
Gray |
White |
φ4.23” |
φ4.23” |
3.97" |
3.97" |
90% |
90% |
-20 °F – 140 °F
|
-20 °F – 140 °F
|
12 VDC: Max 7W 24 VAC: Max 8.5W |
12 VDC: Max 7W 24 VAC: Max 8.5W |
12 VDC or 24 VAC
|
12 VDC or 24 VAC
|
1.54 lb |
1.54 lb |
11.84" |
11.84" |
52 dB
|
52 dB
|
Yes |
Yes |
Yes |
Yes |
3D |
3D |
Angle of view: 103° - 32.1°
|
Angle of view: 103° - 32.1°
|
0.01 Lux @ (F1.2,AGC ON) 0 Lux with IR 0.014 Lux @ (F1.4,AGC ON) 0 Lux with IR |
0.01 Lux @ (F1.2,AGC ON) 0 Lux with IR 0.014 Lux @ (F1.4,AGC ON) 0 Lux with IR |
1 / 3" Progressive Scan CMOS |
1 / 3" Progressive Scan CMOS |
Yes |
Yes |
30m |
30m |
Varifocal, 2.8 - 12mm
|
Varifocal, 2.8 - 12mm
|
Yes |
Yes |
Yes |
Yes |
1080p |
1080p |
No, Control through HD-TVI
|
No, Control through HD-TVI
|
No |
No |
Yes |
Yes |
Vandal Resistant |
Vandal Resistant |
True WDR |
True WDR |
IP66 |
IP66 |
Yes |
Yes |
850nm |
850nm |
CE, FCC, UL |
CE, FCC, UL |
Color |
Diameter |
Height |
Operating Humidity |
Operating Temperature |
Power Consumption |
Line Voltage |
Weight |
Width |
Signal to Noise Ratio |
Auto Gain Control |
Backlight Compensation |
DNR |
Est. Horizontal Viewing Angle |
Minimum Illumination |
Image Sensor |
Day/Night IR Cut Filter |
IR Range |
Lens |
Mirror Mode |
OSD |
Resolution (TVLs) |
RS485 |
Sense-Up (Elec. Shutter) |
Smart IR |
Vandal Resistant |
WDR |
Weather Rating |
White Balance |
IR Wavelength |
Certifications |
Luma Surveillance™ Analog cameras have a 5-Year Limited Warranty. The warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products that have been abused, modified, disassembled, or improperly installed. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.