The Triad 1-Zone High-Power Amplifier delivers high performance, reliability, and robust amplification in a compact form factor—providing the perfect solution for distributed audio systems.
The Triad 1-Zone High-Power Amplifier delivers high performance, reliability, and robust amplification in a compact form factor—providing the perfect solution for distributed audio systems. Fast wake-from-standby time and high-resolution audio quality output make this amplifier worthy of any audio solution.
Use Triad Power Amplifiers with Triad speakers, Triad Audio Matrix Switches, and Control4 EA Series Entertainment and Automation Controllers to deliver a fantastic high-resolution audio experience throughout the home.
Featuring 200W per channel at 4 ohm in stereo mode or 300W when driving one channel, the Triad 1-Zone High-Power Amplifier is an excellent choice to drive Triad passive subwoofers, Designer Series, and other speakers with high-power demands.
The loop output and power controls offer flexibility and the convenient connectivity needed to power multiple sets of outdoor speakers to cover large outdoor areas.
TS-PAMP1-200 |
---|
1 stereo, RCA style |
2-Channel |
201-300W |
Global audio output: 1 stereo, RCA style |
1 stereo output |
1 x 2-position switch |
1 x 3.5 mm (in) 1 x 3.5 mm (out) |
1 x 3-position switch-always on, 12V, or audio sense |
200W per channel @ 4 Ω 100W per channel @ 8 Ω |
300W @ 4 Ω (Note: Do not bridge) 150 @ 8 Ω |
Minimum: Stable to 2.5 Ω |
±0.4 dB, 10 Hz - 20 khZ, all loads |
110 dBA |
100uV, A-weighted, 20 Hz - 20kHz |
Upper bandwidth, -3 dB: > 50 kHz, 4 or 8 Ω |
47 kΩ, f=1 kHz |
0.008%, 4 Ω, f=100 Hz, Po=1W |
Universal mains 100 - 240VAC, 50 - 60 Hz |
Fuse rating: 4A |
IEC 320 C13 connector with 3-pole detachable cord |
32°F - 113°F (0°C - 45°C) |
5% to 95% non-condensing |
-4°F - 158°F (-20°C - 70°C) |
Passive cooling, side vented Thermal dissipation (heat losses): 0.23W / 0.8 BTU/hr standby 11W / 38 BTU/hr, idle all channels 180W / 615 BTU/hr, max continuous power 550W / 1876 BTU/hr, max peak power |
Yes |
1 |
1 |
7.87 x 2.08 x 10.12" (with feet) (200 x 53 x 257 mm) 7.87 x 1.73 x 10.12" (without feet) (200 x 44 x 257 mm) |
1 x blue LED Front panel zone status LED: 1 x RGB LED |
Audio Input Connectors |
Channels |
Watts Per Channel |
Outputs |
Zone Output |
Mono/Stereo mode |
12V Trigger |
Power |
Rated Power (2-Channels Driven) |
1 channel driven |
Impedance |
Frequency Response |
Dynamic Range |
Fan Noise |
Bandwidth |
Impedance Input |
Total Harmonic Distortion (THD) |
AC Main Power |
Ratings |
Power Connection Type |
Operating Temperature |
Operating Humidity |
Storage Temperature |
Thermal Dissipation (heat losses) |
Mains switch w/ changeable fuse |
Input gain potentiometer |
LED Indicators |
Dimensions (W x H x D) |
Front Power LED |
This Limited Warranty runs for a period of ten (10) years for indoor speakers, three (3) years for Triad powered subwoofers, subwoofer amplifiers and outdoor speakers, five (5) years for all Triad PAMP V2 Amplifiers and two (2) years for all other Triad electronics, provided that Triad Distributed Audio Series 1, Series 2, or Series 3 branded speakers will have a limited lifetime warranty, except for the grill, which is warranted for five (5) years. The terms of our limited warranties can be found here.
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.