Perfect for those legacy systems that were pre-wired with only a single coaxial cable to each endpoint. The Binary™ HDMI® over Coax Extender gives you the ability to send HDMI and IR control signals over the existing coax infrastructure. This system is completely resistant to EMI and ESD while delivering 1080p high definition up to 400 feet away.
Perfect for those legacy systems that were pre-wired with only a single coaxial cable to each endpoint. The Binary™ HDMI® over Coax Extender gives you the ability to send HDMI and IR control signals over the existing coax infrastructure. This system is completely resistant to EMI and ESD while delivering 1080p high definition up to 400 feet away.
Existing analog TV installations with coaxial cable can now be easily retrofitted to HDMI® distribution systems using the B-400-1COAX. High-def HDMI® signals are delivered up to 400' at full 1080p 60Hz resolution. At up to 3X the distance, this extender is the ideal problem solver for long-distance residential and commercial HDMI® applications.
In some applications, conventional unshielded twisted pair can be susceptible to interference from fans, microwaves and other devices that emit RF noise. Coaxial wire is fully shielded with a metal braid and foil so it is more resistant to EMI. During development, every connection was hit with ESD at 15KV and surges up to 2500V.
Over the same coax wire, you can easily control DVD players, cable boxes and other source equipment from the TV location. If an automation or remote system is being used, an adapter cable is included to allow control of the TV from the equipment at the head-end. For best performance, use our Episode® IR flashers and receivers.
A bi-color status LED on the TX and RX units indicate if the unit is receiving power and signal - great for troubleshooting! We've even included a locking power connector to secure power to the unit. No more worries about the customer calling because the power came unplugged! An EDID learning mode ensures the TV and source will always be in sync and operating at the highest resolution.
B-400-1COAX-HDIR |
---|
Yes |
No |
HDMI 1.3a |
HDMI Type A 19-pin |
Yes - 36 Bit |
Up to 7.1-channel audio supported including Dolby Digital, DTS, and PCM. (48kHz only) |
Coax RG6 |
Latch-locking |
Up to 400 Ft. (requires RG6 3GHz rated cable and 75 Ohm BNC connectors) |
6.75 Gbps |
CE, FCC, RoHS |
Black |
3" x 1.2" x 3" |
Metal |
20-90% RH (no condensation) |
32-104°F |
6W Max |
5V DC 4A |
Each |
1.4 lbs |
1U |
HDTV up to 1080P 60Hz PC up to 1920 x 1200 (WXUVGA) Note: DOES NOT SUPPORT 480p |
HDCP Compliance |
3D Support |
HDMI Compliance |
HDMI Connector Type |
HDMI Deep Color Support |
Supported Formats |
Recommended Cable |
Power Connection Type |
Transmission Distance |
Supported Video Bandwidth |
Certifications |
Color |
Dimensions (W x H x D) |
Construction |
Operating Humidity |
Operating Temperature |
Power Consumption |
Line Voltage |
Sold As |
Weight |
Rack Spacing |
Supported Resolutions |
This Binary™ product has a 2-year limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty will not apply to products that have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number (RA).
This feature is not currently optimized for mobile devices. We apologize for any inconvenience this may have caused. Please access Keycap engravings from a tablet or desktop computer.